3 Reasons For Premature Bearing Failure (And How to Avoid Them)


Don’t let your bearings down. Be on the lookout for these killers.


Every failed bearing tells a story — one that can help identify machinery problems, maintenance issues, bearing selection errors and other important matters. Are you interested?

You should be.

Bearings face harsh conditions every day, and this can result in premature bearing failure. When bearings fail, quick replacement to minimize downtime is the first priority. In fact, taking the time to investigate the causes of bearing failure can actually increase uptime and decrease both maintenance time and cost.

When it comes to protecting your equipment and processes, you'll want to be aware of the following three problems with your bearings. They can be killers.



#1: Creep

Creep is where slipping occurs at the fitting surfaces, thereby creating a clearance at the fitting surface.

Evidence of creep...

  • A shiny bearing surface, occasionally with scoring or wear
  • Insufficient interference or loose fit
  • Insufficient sleeve tightening
  • Check the interference and prevent rotation
  • Correct the sleeve tightening
  • Study the shaft and housing precision
  • Preload in the axial direction
  • Tighten the raceway ring side face
  • Apply adhesive to the fitting surface
  • Apply a film of lubricant to the fitting surface

#2: Flaking

Flaking occurs when small pieces of bearing material are split off from the smooth surface of the raceway or rolling elements due to rolling fatigue, thereby creating regions having rough and coarse texture.

Evidence of flaking...

  • Rough, coarse texture on the bearing surface


  • Excessive load
  • Poor mounting (misalignment)
  • Moment load
  • Entry of foreign debris, water penetration
  • Poor lubrication, improper lubricant
  • Unsuitable bearing clearance
  • Improper precision for shaft or housing, uneven in housing rigidity, large shaft bending
  • Progression from rust, corrosion pits, smearing, dents (brinelling)


  • Reconfirm the bearing application and check the load conditions
  • Improve the mounting method
  • Improve the sealing mechanism, prevent rusting during non-running
  • Use a lubricant with a proper viscosity, improve the lubrication method
  • Check the precision of shaft and housing
  • Check the bearing internal clearance


#3: Smearing

Smearing is surface damage that occurs from a collection of small seizures between bearing components, caused by oil film rupture and/or sliding.

Evidence of smearing...

  • Surface roughening occurs along with melting


  • High speed and light load
  • Sudden acceleration/deceleration
  • Improper lubricant
  • Entry of water


  • Improve the preload
  • Improve the bearing clearance
  • Use a lubricant with good oil film formation ability
  • Improve the lubrication method
  • Improve the sealing mechanism

Remember this

A bearing failure doesn't just affect specific equipment. These types of failures can — and do — cause entire facilities to grind to a halt.

Don't address an immediate problem by simply installing a new bearing-investigate the cause of bearing failure. You may be able to prolong bearing life, improve productivity and reduce maintenance costs by identifying and resolving issues around bearing selection, mounting, lubrication and application. LMT

For more information on the many NSK products designed to withstand demanding operating conditions, as well as a wealth of resources, tools and services to help you achieve maximum uptime, please visit www.thinknsk.com

For more info, enter 1 at www.LMTfreeinfo.com

Newsletter Sign Up

Your First Name:

Your Last Name:

Your E-Mail Address:

Would you like our Newsletter?:

Enter verification image value

Congratulations to Our Recent Survey Winner

Paul Kimble, a Vibration Analyst for General Motors, was chosen at random to win a $100 gift card for completing our recent online MT Buying Cycle Survey. You could win, too! Watch your e-mail for our next survey request.

Featured Supplier: Brady

bradyBrady Worldwide Inc. is an international manufacturer and marketer of complete solutions that identify and protect premises, products and people. Our products include high-performance labels and signs, safety devices, printing systems and software, and precision die-cut materials. Along with being a global leader in industrial and safety printing systems and solutions, we have been the company you trust when performance matters most since 1914. We serve customers in electronics, telecommunications, manufacturing, electrical, construction, education, medical and a variety of other industries.

Click here for more.

Featured White Paper: Spraying Systems Co.

SSCo Logo Color w tag

Clean Tanks Faster and Lower Operating Costs

Understanding all the tank cleaning equipment options is difficult because not all tank cleaning nozzles are created equal. Let Spraying Systems Co. show you how to reduce cleaning time, minimize liquid consumption and improve cleaning effectiveness. 

Click here to download the White Paper.